Skip to main content

Safety and Handling

WARNING: Make sure you read and follow the safety and handling instructions before using EtcherPro in order to avoid the potential risk of causing damage to the device, electrical shock, fire, or damage to any other property. If EtcherPro gets physically damaged in any way, or you suspect liquid has leaked into the enclosure, unplug the power cable from the socket and avoid using the device before contacting support (hello@balena.io).

Handling​

It is important not to block the air vents on the back and bottom of the device. As such, we suggest setting up EtcherPro on a well supported desk, with plenty of surrounding space to ensure the device is properly ventilated while in use.

Liquid exposure​

EtcherPro’s enclosure is not waterproof. It is important to keep liquids away from the device to avoid spillages. High humidity environments, rain or snow may also cause damage to the device.

Power​

EtcherPro does not have an on/off switch. If you would like to power on the device, you need to plug the power cable into the mains socket. If you would like to power off the device, you need to unplug the power cable. Be sure to unplug the power cable from the socket if you suspect either the cable or the device is physically damaged in some way.

For your own protection and protection of the device, EtcherPro comes with a grounded AC power cable which only fits a grounded mains socket. If you don’t have a grounded socket installed, you should contact a specialist who can safely install an appropriate grounded socket. Do not attempt to power on the device without a connected grounding wire or with a power cable that does not meet the original specifications.

Repairing​

EtcherPro is not meant to be serviced or repaired by the user. If your device has any issues you should contact support (hello@balena.io). Attempting to disassemble the device will void the warranty, and could also cause injury or harm.

Radio interference​

EtcherPro contains components and radios that emit electromagnetic fields. These electromagnetic fields may interfere with medical devices, such as pacemakers and defibrillators. Consult your physician and medical device manufacturer for information specific to your medical device and whether you need to maintain a safe distance of separation between your medical device(s) and EtcherPro. If you suspect EtcherPro is interfering with your medical device, stop using EtcherPro immediately.

EtcherPro emits electromagnetic fields due to the usage of components and radios. These fields can interfere with other devices and potentially cause them to malfunction. If you suspect EtcherPro is interfering with another device, unplug EtcherPro from the power and contact support (hello@balena.io).

This equipment is not suitable for use in locations where children are likely to be present.

Atmospheric conditions (dust and vapor)​

The EtcherPro enclosure is not sealed. Using the device in an environment that has increased amounts of dust, powder, vapors, corrosive substances, or other contaminants can cause malfunction, injury, and/or fire.